Thermostat Bimétallique 90ºC NO

Référence KSD301B-90AF-BT

Condition Neuf

Thermostat Bimétallique / 1/2" / Réarmement Automatique / 16A 230V / NO / Tolérance ±4 Degrés C en Ouvert ±7 Degrés C en Fermeture / Cosses Plates 6.3mm Vertical / 90 Deg. C Normal Ouvert Interrupteur Thermique / Circuit Fermé à Augmentation de Température à 90 Degrés C / Réinitialiser Température 70 Degrés C / Corps de Bakélite / TUV et UL / RoHS / KSD301-9.0/16BT15K20.

Plus de détails

4 Article articles

Imprimer

Volume discounts

Quantity	Price	You Save
600	£0.67	Up to £767.99
200	£0.76	Up to £238.02
50	£0.88	Up to £53.50
25	£1.03	Up to £23.00

Data sheet

Termination	6.3mm QC Terminals
Switching Cycles	100,000
Switching Cycles (16A 250V)	60,000
Cap Material	Aluminium
Body Material	Bakelite
Contact Resistance	Less Than 50 m Ohm
Maximum Ambient Termperature	140 Degrees C
Fixing Hole Centres	24mm

More info

16 Amp 250Vac rated automatic reset thermal cut out suitable for loads of around 3kw (maximum). For currents over 12A please ask about our ceramic base version. Supplied with a loose bracket that can be rotated for mounting. This thermal cut out is normally open (NO), meaning that it is normally in the off position. The thermal cut out will close (turn on) on reaching 90 degrees celsius and reset on temperature drop to 70 degrees celsius. This is a 1/2 inch thermal cut out, not to be confused with the higher rated 3/4 inch thermal cut outs more suitable for higher loads typically found in more powerful power showers. Supplied with 6.3mm horizontal quick connect terminals and enclosed in a bakelite body. Carries TUV approval at 16A 250Vac & American UL approval at 16A 125Vac and complies with RoHS.

Suitable for a range of voltages; consult with the sales office for more information.